Are you looking for a quality, energy efficient solution for a low slope roof and are not sure whether to go for TPO or EPDM roofing membranes? It can be difficult to distinguish between the two products as both are single ply roofing membranes. However, there are important differences that you need to be aware of to figure out which roofing membrane is right for you. When making your decision consider such factors as cost, longevity, durability, maintenance, ease of installation and energy efficiency. To learn more information about how TPO and EPDM stack up against one another, refer to our comparative guide.
EPDM roofs are the most economical choice for single ply roofing membranes. TPO roofing membranes are more expensive than EPDM. Regardless of which membrane you choose, it is better to spend more money and ivest into a thicker membrane. Both EPDM and TPO roofs perform better and last longer if they are thicker.
By far the most important aspect that will determine the longevity of a single ply roofing membrane is the method by which the overlapping seams have been attached together. Permanently attached seams are the safest solution, and improper attachment can be the cause of 99% of leaks.
It is difficult to determine the longevity of TPO roofing membranes for a couple of reasons. First, this is a fairly new roofing product, there are no TPO membranes in the US today that are older than 15 years. Second, TPO membranes continue to be an experimental products- they are all in their 2nd, 3rd and in some
cases 4th generation of formulations, so it is not possible to definitively say how low any of these will last. Moreover, many TPO products have been pulled off the market in the past both for seam and material failures.
An EPDM rubber roof has a solid reputation for durability. Made of rubber compound, EPDM roofs have been on the market for decades- having properly tapered seams and detailed flashings, an EPDM roof will last up to 25 years. It is recognized in the industry as a dependable roofing material that offers resistance against ultraviolet light, ozone, oxidants and severe weather conditions. An EPDM membrane will also preform better than TPO in colder climates.
TPO seam strength is 3 to 4 times that of EPDM adhesive and tape seams.TPO membranes are manufactured to be as durable as EPDM. However, because there are continuous changes and improvements to the formulation, different TPO membranes perform differently. TPO is known to respond poorly to ponding water (it splits and cracks) and also does not have strong resistance to heat and solar overload.
In the beginning of its service life, a properly installed EPDM membrane will not require much maintenance. However, unlike TPO ( which has hot-air welded seams) an EPDM’s seams are treated with an adhesive, making them ultimately vulnerable to coming apart. This means that in the long run an EPDM roof will require maintenance to keep in tact. Be aware that EPDM responds very poorly to any kind of solvents and oils. Therefore, you should not use cleaners or conditioners that contain petroleum solvents, harsh abrasives or Citric based cleaners as these may cause irreparable damage to an EPDM membrane.
TPO membranes are not as easy to maintain as EPDM roofing membranes. In general, it is problematic to weld new materials to a TPO membrane, because as compounds age they loose their pliability and their subsequent thermoplastic capabilities. Consequently, to effectively heat weld new material to an old membrane may require an an “activator” similar to hypalon to seal repairs.
Ease of Installation
An EPDM rubber roof is easier and faster to install than a TPO roofing mebrane. EPDM requires no special equipment for installation while TPO needs to be hot air welded. This makes installing a TPO roofing membrane a more complex and costly process that also requires specialized knowledge. While a beginner roofer contractor will most likely be able to properly install an EPDM membrane, you should only hire an experienced contractor to install a TPO roof. Improper installation will invariably cause leaks and will require costly repairs or replacement.
TPO membranes have become an increasingly popular single ply roofing choice because they offer energy efficiency. White TPO membranes are considered to be a “cool” roofing technology, but other colors of TPO are also formulated to have sun reflective properties. With a TPO roof, it is possible to save money of cooling costs of both residential and commercial properties because by reflecting solar heat, a TPO roof is able to maintain a cooler thermal balance inside the space, reducing the need for additional air conditioning. Energy efficiency makes TPO roofs particularly popular in hot sunny regions that get a lot of cooling days.
While EPDM roofing membranes are also available in white and will offer better reflective properties than darker colored EPDM, and EPDM roof will not offer the same level of energy and financial savings as a TPO roof.
Alternatives to both TPO and EPDM:
Although both EPDM and TPO roofs are widely used in commercial flat roofing, there is another product worth mentioning here – it is PVC roofing. PVC roofs have been around almost as long as rubbers, and much longer than TPO. In fact TPO was created to be a cheaper alternative to PVC (to provide all the benefits of PVC, such as cool roof surface, hot air welded seams, etc), while offering just a slightly higher price than EPDM rubber. However with lower price, come issues of quality. Without going into much details (its a topic for an entire separate article, which we will post shortly), TPO has still unproven track record, and has had its share of material / weld failures, and major reformulation by the manufacturers, to fix the problems of first few generations.
PVC roofs on the other hand, have been installed installed in US for 35+ years with only one major issue which was isolated to a specific membrane type made by a specific manufacturer (Trocal), which is no longer in business. Other than that, PVC roofs (such as IB Roof) have great performance, no leaks when installed properly, by certified contractors, and are very easy to repair, even when they are 30+ year old (see video above).